Farm Supplies (Odds and Ends)

18" Perforated End Cap (Canola)

18" perforated end cap with canola-sized perforations, so air keeps flowing into the grain right to the end of the run. Looking for cereal-grain perforations? Give the office a call.

18" Solid End Cap

18" solid end cap to close off a solid aeration duct run. Seals the end of the line so grain stays out and your airflow stays in the duct.

18" Reinforcement Ring

18" reinforcement rings keep your larger ducting round and rigid under load. New ducts need three rings per 4-foot section — and for the 18" duct you'll want one of each color. Order accordingly.

18" Perforated Duct - 4' Long - 20 Guage - Interlocking Seam (Canola)

18" perforated aeration duct, 4 feet long, in 20-gauge steel with an interlocking seam. The perforations are sized for canola. Need cereal-grain perforations instead? Just call the office and we'll...

18" Solid Duct - 4' long - 22 Guage - Interlocking Seam

18" solid aeration duct, 4 feet long, in heavy 22-gauge steel with an interlocking seam. The larger diameter carries more air for bigger fans and deeper grain, with no perforations so the air goes...

12" Y-Box

12" Y-box for splitting a single aeration duct run into two directions. A handy fitting when you need to branch your airflow across a larger bin floor.

12" Reinforcement Ring

12" reinforcement ring, sold one per pack and finished in black. You'll want two of these for each solid or perforated duct section to keep the ducting round and rigid under the weight of the grain.

12" Perforated Duct - 4' Long - 20 Guage - Interlocking Seam

12" perforated aeration duct, 4 feet long, in 20-gauge steel with an interlocking seam. The perforations let air escape evenly into the grain, so you get good, consistent aeration the length of the...

12" Solid Duct - 4' Long - 22 Gauge - Interlocking Seam

12" solid aeration duct, 4 feet long, in durable 22-gauge steel with an interlocking seam that snaps together for a strong, leak-resistant run. Use the solid sections to carry air where you don't...

18" Flanged Wall Inlet Adaptor (Slips into 18" Fan)

18" flanged wall inlet adaptor, sized to slip into an 18" fan. Mounts through the bin wall and ties your fan into the aeration ducting with a tight, finished connection.

Reducer

Duct reducer for stepping your aeration ducting down to a smaller diameter. Keeps the air moving smoothly where pipe sizes change in your system.

Conversion to Edwards

Conversion kit to adapt your setup to Edwards equipment. If you know you need it, you know you need it — this kit gets you connected without the headache.