Screws, Tubes, and Powerheads

10" Double Hopper Unload Tube

10" double hopper bin unload tubes ship fully assembled and ready to install in a poured concrete foundation or under a drying/aeration floor. Roller slide gates, sweep pivot pin, control rods, a rodent cover and an industrial enamel finish are all...

10" Unload Screw

10" unload screws are right-hand, full pitch, and welded to the screw shaft every 1.5 pitches for durability. Drilled to fit most powerhead output shafts.Important: never start or stop the auger under full load.

8" Unload Screw

8" unload screws are right-hand, full pitch, and welded to the screw shaft every 1.5 pitches for strength. Drilled to fit most powerhead output shafts.Important: never start or stop the auger under full load.

Inclined Powerhead - 25 degree

25-degree inclined powerhead for bin unload systems, supplied complete with electric motor mount, driven pulley, drive belts and drive shields. Support stands are available at extra cost.

Horizontal Powerhead

The horizontal powerhead drives your bin unload system, and the innovative easy-off motor mount makes service quick — with an over-center belt tightener as standard. The two-belt cast aluminum driven sheave, drive belt(s) and belt guard are all...