Thanks for Visiting A&S!
We are THE Online Parts Store!
Dealer Service & Direct Pricing!
A grain bin may look perfectly normal from the outside while conditions are changing deep inside the grain. Temperature and moisture sensor cables give a monitoring system measurement points throughout the grain mass instead of relying on one reading from the top of the bin.
Grain bin temperature cables are suspended through the stored grain with multiple sensor locations along each cable. Those sensing points let a monitoring system compare conditions at different depths and locations in the bin. In an AGI BinManager® system, compatible cables provide temperature and moisture information that becomes part of the system's monitoring, alerting and grain-conditioning decisions.
A temperature cable is not simply one thermometer hanging in the middle of a bin. The cable places multiple sensing points down through the stored grain so conditions can be measured at different depths.
Multiple cables can be used across a bin to create measurement locations through more of the grain mass. The number of cables, cable lengths and sensor configuration depend on the bin and monitoring system.
The cable physically extends through the grain mass and supports multiple sensing locations along its length.
Sensors positioned along the cable collect information from different levels of the grain rather than representing the entire bin with one reading.
Cable readings are collected by the system hardware and converted into information that can be reviewed and used by the connected grain-monitoring system.
With supported AGI equipment, readings can be made available through SureTrack so users can review grain conditions, trends and applicable alerts.
The cable itself is only the first part of the system. Measurement points inside the grain feed information into the monitoring hardware, which can then organize the readings into something useful for the grower and, in a full BinManager system, for automated conditioning.
Stored grain is not always uniform from top to bottom. One area can behave differently from another area only a few feet away. Multiple sensors allow the system to build a vertical picture of conditions instead of assuming the entire grain column is behaving the same way.
Sensors near the top help provide information about conditions in the upper portion of the stored grain.
Additional sensing points continue the temperature and moisture profile through the middle of the grain mass.
Lower sensing locations help show how conditions farther down the grain column compare with those above.
Together, those measurement points provide a much more useful picture than one temperature taken at one location.
Yes. The sensor cables used with supported AGI BinManager configurations provide temperature and moisture-related information from within the grain.
That distinction matters because temperature tells only part of the storage story. Combining temperature and moisture information gives BinManager more context for evaluating grain condition and conditioning opportunities.
A BinManager cable contains multiple sensors distributed along its length. Depending on the cable and installation, the spacing between sensing locations can vary. The important idea is not one universal spacing number. It is having enough measurement points through the grain mass to provide useful coverage for the system configuration.
A single temperature is a snapshot. A series of readings shows direction.
If one sensing location begins changing while surrounding locations remain relatively stable, the pattern may deserve attention. Comparing a sensor with its own history and nearby sensors can provide more context than looking at one number by itself.
A sensor or group of sensors that begins warming differently from surrounding grain may help identify an area that needs closer attention.
Supported moisture sensing can add context when one area of the grain is behaving differently from the rest of the bin.
Repeated readings make it possible to compare today's conditions with earlier readings and see whether something is stable, improving or continuing to change.
A reading that is inconsistent with neighboring sensors can also indicate that the sensing system itself deserves a closer look rather than automatically proving a grain problem.
Because sensor cables measure conditions at multiple locations, the system can compare readings through the grain rather than waiting for a problem to become obvious at the surface.
BinManager can use in-grain temperature information as part of its hotspot monitoring. That gives the system a way to watch for unusually high readings or developing temperature trends that deserve attention.
One unusual sensor reading needs context. Compare nearby sensors, moisture information, previous readings and what is actually happening in the bin. Sensors, cable connections and other system components can also experience faults. If the readings do not make sense together, A&S can help review what the system is reporting.
Sensor cables are suspended from properly designed support locations so they extend down through the grain mass. Cable placement, quantity, length, support and anchoring need to match the bin and the equipment being installed.
That matters because a filled grain bin puts significant loads on equipment suspended inside it. Sensor cables and their supports should be installed according to the applicable manufacturer instructions and bin design rather than simply being hung from a convenient roof location.
Not by themselves. Sensor cables measure conditions. A monitoring system can use those readings to show you what is happening and provide supported alerts.
Automatic fan and heater control requires the appropriate BinManager control hardware and compatible electrical setup. In a full BinManager system, cable information becomes one of the inputs the system can use when managing conditioning equipment.
It is a cable suspended through stored grain with multiple sensing locations positioned along its length. Those sensors allow a monitoring system to collect condition information from different depths in the grain mass.
The number depends on the cable length and system configuration. Taller or differently configured bins can require different cable lengths and sensor arrangements.
Sensor spacing can vary by cable and configuration. BinManager systems use multiple sensing points along the cables so conditions can be measured at different depths throughout the stored grain.
Supported BinManager sensor cables can provide both temperature and moisture-related information, giving the system more context than temperature-only monitoring.
Cable readings can help identify localized warming and temperature trends. BinManager also uses in-grain sensor information for hotspot monitoring and supported alerts.
Not automatically. One unusual reading should be compared with neighboring sensors, historical trends and actual grain conditions. A questionable reading can also be related to a sensor, cable or connection issue.
Compatibility depends on the bin, roof structure, cable support requirements and monitoring equipment. The correct setup should be reviewed before installing cables or support hardware.
With a compatible connected AGI monitoring system, supported sensor information can be viewed through AGI SureTrack on connected devices.
Tell A&S about your bin size, existing equipment and what you want to monitor. We'll help you understand the questions to ask about cables, monitoring and complete BinManager systems.
Talk to A&S About BinManager →Keep Learning About AGI BinManager®